output specifications rs6-r30 3.0 watt regulated single output absolute maximum ratings (4) 1) ripple / noise measured with 20 mhz bandwith. 2) tested by minimal vin and constant resistive load. 3) measured input reflected ripple current with a simulated source inductance of 12uh. 4) exceeding the absolute ratings of the unit could cause damage. it is not allowed for continuous operating. 5) operation under no-load conditions will not damage these devices. however they may not meet all listed specifications. the models listed are just for standard type. if you need a special specification product, please contact our service. phone: +49 69 984047-0, mail to: info@rsg-electronic.de or use the forms on www.rsg-electronic.de (?kontakt). 12 pin sip12 package 1000 vdc isolation up to 3000 vdc isolation continuous short circuit protection efficiency up to 71% -25c~71c operation temperature range voltage accuracy 2% line regulation 0.5% load r egulation (from 0% to 100% load) 0.5% (3.3 v output model) 1.5% ripple & noise (20 mhz bandwith) (1) 75 mv pk-pk short circuit protection indefinite (automatic recovery) temperature coefficient 0.02%/c capacitor load (2) see table voltage range 10% max. input current see table no-load input current see table input filter capacitors input reflected ripple current (3) 20 ma pk-pk input specifications efficiency see table i/o isolation voltage (3 sec.) input / output 1000 ~ 3000 vdc i/o isolation capacitance 60 pf typ. i/o isolation resistance 1000 m ohm switching frequency 50 khz typ. humidity 95% rel. h reliability calculated mtbf (mil-hdbk-217f) > 1.12 mhrs. safety standard (designed to meet) iec 60950-1 general specifications case material non-conductive black plastic (ul94v-0 rated) pin material 0.5 mm alloy42 solder-coated potting material epoxy (ul94v-0 rated) weight 7.2 g dimensions 1.26 x 0.32 x 0.57 physical specifications operating temperature -25c~ 71c (see derating curve) maximum case temperature 100c storage temperature -40c~125c cooling nature convection environment specifications note these are stress ratings. exposure of devices to any of these conditions may adversely affect long-term reliability. input voltage (100 ms) 5 modes 0 ~ 7 vdc 12 modes 0 ~ 15 vdc 24 modes 0 ~ 28 vdc lead soldering temperature 260c (1.5 mm from case 10 sec.) all specifications typical at ta = 25c, nominal input voltage and full load unless otherwise specified. the information and specifications contained in this data sheet are believed to be correct at time of publication. however, we accept no responsibility for consequences arising from printing errors or inaccuracies. subject to change without notice. page: 1/3 last update: 18.02.09 sil 12 package, pic. similar
rs6-r30 3.0 watt regulated single output derating curve model number input input current (ma) output output current efficiency capacitor range vdc no load / full load vdc full load (ma) @fl (%) load ( hf) RS6-0503R30AX 5 100 / 748 3.3 600 53 470 rs6-0505r30ax 5 100 / 968 5 600 62 470 rs6-0507r30ax 5 100 / 938 7.2 416 64 470 rs6-0509r30ax 5 100 / 896 9 333 67 470 rs6-0512r30ax 5 100 / 858 12 250 70 470 rs6-0515r30ax 5 100 / 883 15 200 68 470 rs6-0518r30ax 5 120 / 938 18 166 64 470 rs6-0524r30ax 5 120 / 938 24 125 64 470 rs6-1203r30ax 12 60 / 300 3.3 600 55 470 rs6-1205r30ax 12 60 / 417 5 600 60 470 rs6-1207r30ax 12 60 / 397 7.2 416 63 470 rs6-1209r30ax 12 60 / 374 9 333 67 470 rs6-1212r30ax 12 60 / 363 12 250 69 470 rs6-1215r30ax 12 60 / 358 15 200 70 470 rs6-1218r30ax 12 60 / 391 18 166 64 470 rs6-1224r30ax 12 60 / 368 24 125 68 470 rs6-2403r30ax 24 30 / 153 3.3 600 54 470 rs6-2405r30ax 24 30 / 205 5 600 61 470 rs6-2407r30ax 24 30 / 198 7.2 416 63 470 rs6-2409r30ax 24 30 / 193 9 333 65 470 rs6-2412r30ax 24 30 / 179 12 250 70 470 rs6-2415r30ax 24 30 / 176 15 200 71 470 rs6-2418r30ax 24 30 / 181 18 166 69 470 rs6-2424r30ax 24 30 / 176 24 125 71 470 model selection guide page: 2/3 last update: 18.02.09 number structure isolation 1=1.0 kvdc 3=3.0 kvdc power 30=3.0w output 03=3.3v 05=5v 07=7.2v 09=9v 12=12v 15=15v 18=18v 24=24v code internal type r=single regulated input 05=5v 12=12v 24=24v name/package rs6=sil12 rs6 - xx xx r 30 a x
pin number 1 2 3 9 10 11 12 mechanical specifications single +v input n.c. n.c. n.c. -v output +v output -v input rs6-r30 3.0 watt regulated single output page: 3/3 last update: 18.02.09 mail: info@rsg-electronic.de www.rsg-electronic.de rsg electronic components gmbh sprendlinger landstr. 115 d-63069 offenbach tel. +49 69 984047-0 fax +49 69 984047-77 efficiency vs output current 05 efficiency vs output current 12 efficiency vs output current 24 05 models 24 models 12 models pin connections notes: all dimensions are typical in millimeters (inches). 1) pin diameter: 0.5 0.05 (0.02 0.002) 2) pin pitch tolerance: 0.35 ( 0.014) 3) case tolerance: 0.5 ( 0.02) single -a3 +v input -v input n.c. n.c. -v output +v output n.c.
|
